How To Enter The System Event Log With Faults Displayed - EMS FirePoint 5000 Step-By-Step Manual

EMS 5000 FIREPOINT
5 Press Yes key and the screen will now
display:
6 Enter the date Required to be viewed in
dd/mm/yy Format, (e.g.28/05/03) then press
Yes key and the screen will now display:
The log for the date selected can now be viewed by using the  
Arrows next to the display, all fire and fault events are listed in date
and time order. Using number 5 on the keypad will take you to the
oldest event, number 8 on the keypad latest event. (Look at the fault
list for examples of descriptions that are in the log).

3. How To Enter The System Event Log With Faults Displayed

To enter the sytem event log on the 5000 FirePoint with faults displayed there
are two ways.
The first way is to isolate the devices that are in fault. The second way is to
enter the engineer's menu main. To enter the engineer's main menu insert the
key into the panel controls keyswitch, located at the right of the panel.
Step
No
1 Turn the key to the on position and the
screen will display:
2 Press 0 key and the screen will now display:
3 Press  key four times and the screen will
display:
4 Press Yes key and the screen will now display:
5 Press 221100 then press Yes key and the
screen will display:
©2015 EMS Security Group Ltd. All rights reserved.
Action
5
Enter the date to
View:
Yes = Finish
- - - - - - - - - - - - - - - -
On 28/05/03 At 00:00
New Day of 28/05/03
Yes = Select
Screen Display
Panel in Access
Date
|** Fire system **|
>Dev. Isolate/Test<
| Net. Isolate/Test |
Yes= Select
|Brigade Isolate |
>Engineers Config<
|Printer Options |
Yes= Select
Enter Your PIN
For Access>
Then Press YES
|** Eng.; Config ** |
>Device Database <
|Sounder Options |
Yes= Select
TSD258 Iss 3 25/06/15 AJM
/ /
Time
Time
Time
Time
Time
Time
Time