How To Log On A Device - EMS FirePoint 5000 Step-By-Step Manual

EMS 5000 FIREPOINT
16 Press Yes key once the Screen will now
display
17 Press NO key three times and the screen will
display:
18 Turn the Control key switch to the off
position and the screen will now display:
Note: The isolate LED on the 5000 FirePoint Master Panel and 5000
FirePoint Slave Panel will clear and the isolate beep will stop.

8. How To Log On A Device

To log on a device onto the 5000 FirePoint, take the device in front of the
panel. Insert the key into the panel controls keyswitch, located at the right of
the panel.
Step
No
1 Turn the key to the on position and the
screen will display:
2 Press 0 key and the screen will now display:
3 Press  key three times and the screen will
display:
4 Press Yes key and the screen will now display:
5 Press  key four times and the screen will
display:
©2015 EMS Security Group Ltd. All rights reserved.
Action
13
Device 125 on NET 04
Set to ACTIVE
Push Any Key
Panel in Access
Date
Status Normal
Date
Screen Display
Panel in Access
Date
|***Options ****|
>Passwords
|Time and Date |
Yes =Select
|
Logging
>Fire System Opts<
|Remote Access
Yes = select
|** Fire system **|
>Dev. Isolate/Test<
| Net. Isolate/Test |
Yes= Select
|Brigade Isolate |
>Engineers Config<
|Printer Options |
Yes= Select
TSD258 Iss 3 25/06/15 AJM
Time
Time
Time
Time
<
Time
|
|
Time
Time
Time