How To Remove A Device - EMS FirePoint 5000 Step-By-Step Manual

EMS 5000 FIREPOINT

9. How To Remove A Device

To remove a device off the 5000 FirePoint, insert the key into the panel
controls keyswitch, located at the right of the panel.
Step
No
1 Turn the key to the on position and the
screen will display:
2 Press 0 key and the screen will now display:
3 Press  key three times and the screen will
display:
4 Press Yes key and the screen will now display:
5 Press  key four times and the screen will
display:
6 Press Yes key and the screen will now
display:
7 Press 221100 then press Yes key and the
screen will display:
8 Press  key five times and the screen will
display:
9 Press Yes key and the screen will now
display:
©2015 EMS Security Group Ltd. All rights reserved.
Action
16
Screen Display
Panel in Access
Date
|***Options ****|
>Passwords
|Time and Date |
Yes =Select
|
Logging
>Fire System Opts<
|Remote Access
Yes = select
|** Fire system **|
>Dev. Isolate/Test<
| Net. Isolate/Test |
Yes= Select
|Brigade Isolate |
>Engineers Config<
|Printer Options |
Yes= Select
Enter Your PIN
For Access>
Then Press YES
|** Eng.; Config ** |
>Device Database <
|Sounder Options |
Yes= Select
|Site Survey
>Remove Devices
|Panel Hardware
Yes= Select
Enter Device
(Numbers 1-256)
Number > _
YES = Finish
TSD258 Iss 3 25/06/15 AJM
Time
<
Time
|
|
Time
Time
Time
Time
Time
|
<
|
Time
Time