Registering A Bluetooth Device - Toyota C-HR 2017 Owner's Manual

■
CONNECTING MANUALLY
When the auto connection has failed or
"Bluetooth Power" is turned off, it is
necessary to connect the Bluetooth
device manually.
1
Press the "MENU" button.
2
Select "Setup".
3
Select "Bluetooth".
4
Follow the steps in "CONNECTING A
®
Bluetooth DEVICE" from "STEP 2".
(P.49)
■
RECONNECTING THE Bluetooth
PHONE
®
If a Bluetooth phone is disconnected
due to poor reception from the
®
Bluetooth network when the engine
switch is in the following, the system
automatically
®
Bluetooth phone.
Vehicles without a smart key system
The engine switch is in the "ACC" or
"ON" position.
Vehicles with a smart key system
The engine switch is in ACCESSORY
or IGNITION ON mode.
C-HR_Navi_USA_OM10581U_17CY
®
®
reconnects the
2. CONNECTIVITY SETTINGS
REGISTERING A Bluetooth
DEVICE
®
Up to 5 Bluetooth devices can be reg-
istered.
®
Bluetooth compatible phones (HFP)
and audio players (AVP) can be regis-
tered simultaneously.
This operation cannot be performed
while driving.
1
Display the Bluetooth
screen. (P.48)
2
Select "Add New Device".
When another Bluetooth
nected
 To disconnect the Bluetooth
select "Yes".
®
When 5 Bluetooth
ready been registered
 A registered device needs to be replaced.
Select "Yes", and select the device to be
replaced.
3
Follow the steps in "REGISTERING A
®
Bluetooth PHONE FOR THE FIRST
TIME" from "STEP 5". (P.43)
®
2
®
settings
®
device is con-
®
device,
devices have al-
51