Toyota C-HR 2017 Owner's Manual page 133

Phone
Command
"Call <contact>"*
"Call <contact> <phonetype>"*
"Dial <phone number>"
"Redial"
"Call back"
"Show recent calls"
"Send a message to <contact>"
*: If the system does not recognize the name of a contact, create a voice tag. (P.184) The
name of a contact can also be recognized by adding a voice tag.
While in a phone call
Command
"Send <digits>"
"Mute"
"Unmute"
While incoming message notification is displayed*
Command
"Read message"
"Ignore"
"Reply"
"Call"
*: Full screen message notification must be turned on within the phone settings (P.175)
C-HR_Navi_USA_OM10581U_17CY
1. VOICE COMMAND SYSTEM OPERATION
Action
Places a call to the specified contact from the phone book
Places a call to the specified phone type of the contact
from the phone book
Places a call to the specified phone number
Places a call to the phone number of the latest outgoing
call
Places a call to the phone number of latest incoming call
Displays the call history screen
Sends a text message to specified contact from the
phone book
Action
Sends DTMF tones has specified
Mutes the microphone (far side cannot hear the conver-
sation)
Unmutes the microphone
Action
Reads the incoming message over the vehicle speakers
Ignores the incoming message notification
Initiates sending a reply to the incoming message
Places a call to the phone number of incoming message
4
133