Toyota C-HR 2017 Owner's Manual page 180

2. SETUP
■
UPDATING
PHONE
1
Select "Update Now".
 Contacts are transferred automatically.
2
Check that a confirmation screen is
displayed when the operation is com-
plete.
 This operation may be unnecessary
depending on the type of cellular phone.
 If another Bluetooth
when transferring contact data, depending
on the phone, the connected Bluetooth
device may need to be disconnected.
 Depending on the type of Bluetooth
phone being connected, it may be neces-
sary to perform additional steps on the
phone.
■
UPDATING THE CONTACTS IN A
DIFFERENT WAY (FROM THE CALL
HISTORY SCREEN)*
1
Display the
(P.156)
2
Select "History" and select a contact
not yet registered in the contact list.
3
Select "Update Contact".
4
Select the desired contact.
5
Select a phone type for the phone
number.
*: For PBAP compatible Bluetooth
this function is available when "Automatic
Transfer" is set to off. (P.179)
180
C-HR_Navi_USA_OM10581U_17CY
CONTACTS FROM
®
device is connected
®
®
phone top screen.
®
phones,
TRANSFERRING CONTACTS
FROM DEVICE
■
FROM PHONE (OPP COMPATIBLE
®
Bluetooth PHONES ONLY)
1
Select "Transfer Contacts from De-
vice".
2
Select "From Phone (Bluetooth)".
When the contact is not registered
3
Transfer the contact data to the system
®
using a Bluetooth phone.
 This operation may be unnecessary
depending on the type of cellular phone.
 To cancel this function, select "Cancel".
4
Check that a confirmation screen is
displayed when the operation is com-
plete.
When the contact is registered
3
Select "Replace Contacts" or "Add
Contact".
"Replace Contacts": Select to transfer
the contact from the connected cellular
phone and replace the current one.
"Add Contact": Select to transfer the de-
sired contact data from the connected cel-
lular phone to add to the current one.