Toyota C-HR 2017 Owner's Manual page 244

5. SETUP
No. Function
Select to set display of low
fuel warning on/off.
Select to set unverified
roads guidance warning
on/off.
Select to set IPD road
(roads that are not com-
pletely digitized in our data-
base) guidance on/off.
Select to set the voice guid-
ance for the next street
name on/off.
Select to set favorite POI
categories that are used for
POI selection to display on
the map screen.
Select to adjust the current
position mark manually or
to adjust miscalculation of
the distance caused by tire
replacement.
Select to enable/disable
adaptive routes. When en-
abled, the navigation sys-
tem will provide frequently
used routes.
Select to erase adaptive
route data.
Select to set automatic
destination list info on/off.
When set to on, the esti-
mated time of arrival to the
registered home and pre-
set destinations from the
current position will be dis-
played.
Select to set display of a
guidance screen on/off.
244
C-HR_Navi_USA_OM10581U_17CY
Page No.
Select to set automatic
246
zoom function on/off. When
it is enabled, as the vehicle
approaches

point, the map will change
to a detailed map automat-
ically.
Select to set cross-border

guidance on/off.
Select to set the map dis-
play color.

Select to set map anima-
tion on/off.
Select to enable/disable
245
routes sourced from the
*
Toyota Entune center.
Select to reset all setup
items.
245
*: This function is not available in some
countries and areas.




Function Page

a guidance



224
