Toyota C-HR 2017 Owner's Manual page 44

2. CONNECTIVITY SETTINGS
 A PIN-code is not required for SSP
(Secure Simple
®
Bluetooth devices. Depending on the
type of Bluetooth
nected, a message confirming registra-
tion may be displayed on the Bluetooth
device's screen. Respond and operate the
®
Bluetooth device according to the confir-
mation message.
7
Check that the following screen is dis-
played, indicating pairing was success-
ful (a Bluetooth
established but registration is not yet
complete).
 At this stage, the Bluetooth
not yet available.
8
Check that "Connected" is displayed
and registration is complete.
 If an error message is displayed, follow
the guidance on the screen to try again.
44
C-HR_Navi_USA_OM10581U_17CY
Pairing) compatible
®
device being con-
®
®
link has been
®
functions are
INFORMATION
● If a cellular phone does not operate
properly after being connected, turn the
cellular phone off and on and then con-
nect it again.