Registering/Connectinga Bluetooth ® Phone; Using The Phone Switch/ Microphone - Toyota C-HR 2017 Owner's Manual

1. PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
REGISTERING/CONNECTING
®
A Bluetooth
To use the hands-free system for cellu-
lar phones, it is necessary to register a
cellular phone
(P.43)
CONNECTING A Bluetooth
DEVICE
Registering an additional device
1
Display the
(P.156)
2
Select "Select Device".
3
Select "Add Device".
 When another Bluetooth
nected, a confirmation screen will be dis-
played. To disconnect the Bluetooth
device, select "Yes".
4
Follow the steps in "REGISTERING A
®
Bluetooth PHONE FOR THE FIRST
TIME" from "STEP 5". (P.43)
Selecting a registered device
1
Display the
(P.156)
2
Select "Select Device".
3
Select the desired device to be con-
nected.
4
Check that a confirmation screen is
displayed when the connection is com-
plete.
 If an error message is displayed, follow
the guidance on the screen to try again.
158
C-HR_Navi_USA_OM10581U_17CY
PHONE
with the system.
®
phone top screen.
®
device is con-
®
phone top screen.
®
Bluetooth PHONE CONDITION
DISPLAY
The condition of the Bluetooth
appears on the upper right side of the
screen. (P.18)
USING THE PHONE SWITCH/
MICROPHONE
STEERING SWITCH
By pressing the phone switch, a call
can be received or ended without tak-
ing your hands off the steering wheel.
Volume control switch
 Press the "+" side to increase the volume.
 Press the "-" side to decrease the vol-
ume.
Off hook switch
 If the switch is pressed when an Apple
CarPlay connection is established, the
Apple CarPlay phone application will be
displayed on the system screen.
On hook switch
®
phone