Basic Information Before Operation; Initial Screen - Toyota C-HR 2017 Owner's Manual

1. BASIC INFORMATION BEFORE OPERATION

1. INITIAL SCREEN

Vehicles without a smart key system
When the engine switch is turned to the
"ACC" or "ON" position, the initial screen
will be displayed and the system will begin
operating.
Vehicles with a smart key system
When the engine switch is turned to AC-
CESSORY or IGNITION ON mode, the ini-
tial screen will be displayed and the
system will begin operating.
 After a few seconds, the caution screen
will be displayed.
 After about 5 seconds or selecting "Con-
tinue", the caution screen automatically
switches to the next screen.
WARNING
●
When the vehicle is stopped with the
engine running, always apply the park-
ing brake for safety.
30
C-HR_Navi_USA_OM10581U_17CY
MAINTENANCE
INFORMATION*
This system reminds users when to re-
place certain parts or components and
shows dealer information (if regis-
tered) on the screen.
When the vehicle reaches a previously
set driving distance or date specified
for a scheduled maintenance check,
the maintenance reminder screen will
be displayed when the system is
turned on.
 The screen goes off if the screen is not
operated for several seconds.
 To prevent the screen from being dis-
played again, select "Do Not Tell Me
Again".
 To register maintenance information:
P.71
 If is selected, the registered
phone number can be called.
*: Entune Premium Audio only