Table of Contents
Advertisement
1. BASIC INFORMATION BEFORE OPERATION
1. INITIAL SCREEN
1
When the "POWER" switch is in AC-
CESSORY or ON mode, the initial
screen will be displayed and the sys-
tem will begin operating.
Images shown on the initial screen can
be changed to suit individual prefer-
ences. (See page 48.)
CAUTION
●
When the vehicle is stopped with the
hybrid system operating, always apply
the parking brake for safety.
After a few seconds, the "CAUTION"
screen will be displayed.
After about 5 seconds, the "CAUTION"
screen automatically switches to the map
screen. (If a button other than the "MAP/
VOICE" button is pressed, the function's
corresponding screen will be displayed.)
26
MAINTENANCE INFORMATION
This system reminds users when to re-
place certain parts or components and
shows dealer information (if regis-
tered) on the screen.
When the vehicle reaches a previously
set driving distance or date specified
for a scheduled maintenance check,
the "Maintenance Reminder" screen
will be displayed when the navigation
system is turned on.
This screen goes off if the screen is not
operated for several seconds.
To prevent this screen from being dis-
played again, touch "Do Not Display
This Message Again".
To register maintenance information,
see "MAINTENANCE" on page 121.
PRIUS (US) NAVI 47719U
12.02.24
09:22
Advertisement
Table of Contents
Related Manuals for Toyota Prius Navi
Summary of Contents for Toyota Prius Navi
-
Page 1: Initial Screen
1. BASIC INFORMATION BEFORE OPERATION 1. INITIAL SCREEN When the “POWER” switch is in AC- MAINTENANCE INFORMATION CESSORY or ON mode, the initial screen will be displayed and the sys- This system reminds users when to re- tem will begin operating. place certain parts or components and shows dealer information (if regis- tered) on the screen. -
Page 2: Basic Information Before Operation
1. BASIC INFORMATION BEFORE OPERATION 2. TOUCH SCREEN OPERATION This system is operated mainly by the INFORMATION buttons on the screen. (Referred to as ● If the system does not respond to touch- screen buttons in this manual.) ing a screen button, move your finger away from the screen and then touch it again. -
Page 3: Inputting Letters And Numbers/List Screen Operation
1. BASIC INFORMATION BEFORE OPERATION 3. INPUTTING LETTERS AND NUMBERS/LIST SCREEN OPERATION On certain letter entry screens, letters can When searching for an address or be entered in upper or lower case. name, or entering data, letters and numbers can be input via the screen. Icon Function Touch to enter in lower case. - Page 4 1. BASIC INFORMATION BEFORE OPERATION TO DISPLAY THE LIST LIST SCREEN OPERATION Touch “OK” to search for an address When a list is displayed, use the appro- or a name. priate screen button to scroll through the list. Matching items from the database are listed even if the entered address or name is incomplete.
- Page 5 1. BASIC INFORMATION BEFORE OPERATION SORTING Screen button Function Touch to sort in order of The order of a list displayed on the “Distance” distance from the current screen can be rearranged. position. Touch “Sort”. Touch to sort in order of “Date”...
-
Page 6: Screen Settings Adjustment
1. BASIC INFORMATION BEFORE OPERATION 4. SCREEN ADJUSTMENT Adjusting the screen display The contrast and brightness of the screen display and the image the cam- era displays can be adjusted. The dis- play can also be turned off, and/or changed to either day or night mode. (For information regarding audio/video screen adjustment,... - Page 7 1. BASIC INFORMATION BEFORE OPERATION Touch the desired screen button to ad- CHANGING BETWEEN DAY just contrast and brightness. AND NIGHT MODE Screen button Function Depending on the position of the head- light switch, the screen changes to day Touch to strengthen the “Contrast”...
-
Page 8: Map Screen Operation
1. BASIC INFORMATION BEFORE OPERATION 5. MAP SCREEN OPERATION CURRENT POSITION INFORMATION DISPLAY ● After the 12-volt battery disconnection, or on a new vehicle, the current position may not be correct. As soon as the sys- When starting the navigation system, tem receives signals from the GPS, the the current position is displayed first. - Page 9 1. BASIC INFORMATION BEFORE OPERATION TO REGISTER THE CURSOR After the screen is scrolled, the map remains centered at the selected loca- POSITION AS AN ADDRESS tion until another function is activated. BOOK ENTRY The current position mark will continue to move along your actual route and Address book entry registration en- may move off the screen.
- Page 10 1. BASIC INFORMATION BEFORE OPERATION TO SEE INFORMATION ABOUT If “Enter ” is touched, the cursor THE ICON WHERE THE position will be set as a destination. CURSOR IS SET If a destination has already been set, “Enter ” and “Add to Route” will be displayed.
- Page 11 1. BASIC INFORMATION BEFORE OPERATION ■ ADDRESS BOOK ENTRY INFOR- If “Enter ” is touched, the cursor MATION position will be set as a destination. If a destination has already been set, When the cursor is set on an address “Enter ”...
- Page 12 1. BASIC INFORMATION BEFORE OPERATION ■ ■ ® DESTINATION INFORMATION XM NavTraffic TEXT INFORMA- TION When the cursor is set on a destination icon, the name and “Info” are dis- ® When the XM NavTraffic icon on the played on the top of the screen. map screen is touched, the XM ®...
-
Page 13: Switching The Screens
1. BASIC INFORMATION BEFORE OPERATION SWITCHING THE SCREENS Screen button Function Touch to display the inter- Any of the screen configurations can section guidance screen be selected. “Intersection” or the guidance screen on the freeway. (See page Touch “Map Mode”. 80.) Touch to display the audio “Audio”... - Page 14 1. BASIC INFORMATION BEFORE OPERATION ■ FUEL CONSUMPTION SCREEN CONFIGURATIONS The fuel consumption screen and the ■ MAP ONLY map screen are displayed. This is a regular map screen. Touching “ ” or “ ” allows selection of the desired mode (“Energy Monitor” or The screen shows the single map.
- Page 15 1. BASIC INFORMATION BEFORE OPERATION ■ ■ EDITING RIGHT MAP COMPASS The right side map can be edited by The current position is indicated with a touching any point on the right side compass. map. Touch the desired screen button. Information about the destination, current position and a compass is displayed on the screen.
-
Page 16: Map Scale
1. BASIC INFORMATION BEFORE OPERATION MAP SCALE ORIENTATION OF THE MAP Touch to change the scale The orientation of the map can be changed from north-up to heading-up of the map screen. by touching the orientation symbol at the top left of the screen. Touch North-up screen The scale bar and indicator at the bottom... -
Page 17: Standard Map Icons
1. BASIC INFORMATION BEFORE OPERATION STANDARD MAP ICONS Icon Name Island Park Industry Business facility Airport Military University Hospital Stadium Shopping mall Golf PRIUS (US) NAVI 47719U 12.02.24 09:22...