Toyota C-HR 2017 Owner's Manual page 246

5. SETUP
■
POSITION/DIRECTION
TION
When driving, the current position
mark will be automatically corrected by
GPS signals. If GPS reception is poor
due to location, the current position
mark can be adjusted manually.
1
Select "Position/Direction".
2
Scroll the map to the desired point
(P.200) and select "OK".
3
Select an arrow to adjust the direction
of the current position mark and select
"OK".
■
TIRE CHANGE CALIBRATION
The tire change calibration function will
be used when replacing the tires. This
function will adjust
caused by the circumference differ-
ence between the old and new tires.
1
Select "Tire Change".
 The message appears and the quick dis-
tance calibration starts automatically.
INFORMATION
●
If this procedure is not performed when
the tires are replaced, the current posi-
tion mark may be incorrectly displayed.
246
C-HR_Navi_USA_OM10581U_17CY
CALIBRA-
When the fuel level is low, a warning
message will pop up on the screen.
1
Display the detailed navigation settings
screen.
2
Select "Low Fuel Warning Pop-up".
3
Select "On" or "Off".
■
SEARCHING GAS STATION IN LOW
FUEL WARNING
A nearby gas station can be selected
as a destination when the fuel level is
low.
1
Select "Yes" when the low fuel warn-
ing appears.
2
Select the desired nearby gas station.
miscalculation
3
Select "Enter" to set as a destination.
"Info": Select to display gas station infor-
mation. (P.201)
LOW FUEL WARNING
( )
P.243