Toyota C-HR 2017 Owner's Manual page 226

3. ROUTE GUIDANCE
DISTANCE AND TIME TO
DESTINATION
When the vehicle is on the guidance
route, the route information bar dis-
plays the distance with the estimated
travel/arrival time to the destination.
When the set destination is 1
1
Select the route information bar to
change the display of the route infor-
mation bar between the estimated trav-
el time and the estimated arrival time.
When the set destinations are more than
1
1
Select the route information bar.
2
Check that the list of the distance and
time is displayed.
"Arrival Time": Select to display the esti-
mated arrival time.
"Time to Dest.": Select to display the es-
timated travel time.
226
C-HR_Navi_USA_OM10581U_17CY
 By selecting one of the number buttons,
the desired route information is displayed.
INFORMATION
●
When the vehicle is on the guidance
route, the distance measured along the
route is displayed. Travel time and
arrival time are calculated based on the
average speed of the specified speed
limits and current traffic information.
●
When the vehicle gets off the guidance
route, the arrow facing the destination is
displayed instead of the estimated
travel/arrival time.
●
The route information bar fills from left to
right as the vehicle progresses along the
route.