1. VOICE COMMAND SYSTEM OPERATION
Selecting "Help" or saying "Help"
prompts the voice command system to
offer examples of commands and oper-
ation methods.
Registered POIs, registered names in the
contacts list etc., can be said in the place
of the "<>" next to the commands.
(P.131)
For example: Say "Find a restaurant",
"Call John Smith" etc.
If a desired outcome is not shown, or if no
selections are available, perform one of
the following to return to the previous
screen:
• Say "Go back".
• Select
.
To cancel voice recognition, select
say
, or press and hold the talk
"Cancel"
switch.
To perform the voice command operation
again, select "Start Over" or say "Start
over".
To suspend voice command operation,
select "Pause". To resume the voice com-
mand operation, select "Resume" or
press the talk switch.
128
C-HR_Navi_USA_OM10581U_17CY
INFORMATION
●
If the system does not respond or the
confirmation screen does not disappear,
press the talk switch and try again.
●
If a speech command cannot be recog-
nized 3 consecutive times, the system
suggest the way to increase the voice
recognition performance. (P.129)
●
The
amount
of
received from the system while using
the voice command system (voice rec-
ognition prompts) can be changed on
the voice settings screen. (P.69)
●
Some voice guidance can be canceled
by setting voice prompts to off. Use this
setting when it is desirable to say a com-
mand immediately after pressing the talk
switch and hearing a beep.
,
spoken
feedback