Toyota C-HR 2017 Owner's Manual page 181

4
Transfer the contact data to the system
using a Bluetooth
 This operation may be unnecessary
depending on the type of cellular phone.
 To cancel this function, select "Cancel".
5
Check that a confirmation screen is
displayed when the operation is com-
plete.
■
FROM USB DEVICE
Backed-up contact data ("vCard" for-
matted) can be transferred from USB
device or Bluetooth
via USB to this system.
1
Connect a USB device. (P.80)
2
Select "Transfer Contacts from De-
vice".
3
Select "From USB".
4
Select "USB 1" or "USB 2" when the
multiple USB devices are connected.
 If a USB device is connected, skip this
procedure.
When the contact is not registered
5
Select a desired file from vCard file list.
6
Check that a confirmation screen is
displayed when the operation is com-
plete.
C-HR_Navi_USA_OM10581U_17CY
®
phone.
®
phone connected
When the contact is registered
5
Select "Replace Contacts" or "Add
Contact".
"Replace Contacts": Select to transfer
the contact from the connected USB de-
®
vice or Bluetooth phone and replace the
current one.
"Add Contact": Select to transfer the de-
sired contact data from the connected
USB device or Bluetooth
the current one.
6
Select a desired file from vCard file list.
7
Check that a confirmation screen is
displayed when the operation is com-
plete.
INFORMATION
●
Depending type of phone used and
number of files, it may take time to dis-
play vCard file lists and download con-
tacts.
●
Downloading may not complete cor-
rectly in the following cases:
• If the engine switch is turned off during
downloading.
• If the USB device or Bluetooth
is removed before downloading is
complete.
2. SETUP
®
phone to add to
7
®
phone
181