Basic Information Before Operation; Initial Screen - Toyota PRIUS 2014 Owner's Manual

1. BASIC INFORMATION BEFORE OPERATION

1. INITIAL SCREEN

1
When the "POWER" switch is in AC-
CESSORY or ON mode, the initial
screen will be displayed and the sys-
tem will begin operating.
Images shown on the initial screen can
be changed to suit individual prefer-
ences. (See page 48.)
CAUTION
●
When the vehicle is stopped with the
hybrid system operating, always apply
the parking brake for safety.
After a few seconds, the "CAUTION"
screen will be displayed.
After about 5 seconds, the "CAUTION"
screen automatically switches to the map
screen. (If a button other than the "MAP/
VOICE" button is pressed, the function's
corresponding screen will be displayed.)
When the navigation system is turned
on in a screen other than the map
screen, the "CAUTION" screen will be
displayed when the screen is changed
to the map screen for the first time after
it has been turned on.
26
MAINTENANCE INFORMATION
This system reminds users when to re-
place certain parts or components and
shows dealer information (if regis-
tered) on the screen.
When the vehicle reaches a previously
set driving distance or date specified
for a scheduled maintenance check,
the "Maintenance Reminder" screen
will be displayed when the navigation
system is turned on.
This screen goes off if the screen is not
operated for several seconds.
To prevent this screen from being dis-
played again, touch "Do Not Display
This Message Again".
To register maintenance information,
see "MAINTENANCE" on page 122.