Basic Information Before Operation; Initial Screen - Toyota VENZA NAVI User Manual

1. BASIC INFORMATION BEFORE OPERATION

1. INITIAL SCREEN

1
When the "ENGINE START STOP"
switch is in ACCESSORY or IGNITION
ON mode, the initial screen will be dis-
played and the system will begin oper-
ating. (Vehicles with a smart key
system)
When the engine switch is in the "ACC"
or "ON" position, the initial screen will
be displayed and the system will begin
operating. (Vehicles without a smart
key system)
 Images shown on the initial screen can
be changed to suit individual prefer-
ences. (See page 48.)
CAUTION
●
When the vehicle is stopped with the
engine running, always apply the park-
ing brake for safety.
 After a few seconds, the "CAUTION"
screen will be displayed.
 After about 5 seconds, the "CAUTION"
screen automatically switches to the map
screen. (If a button other than the "MAP/
VOICE" button is pressed, the function's
corresponding screen will be displayed.)
26
 When the navigation system is turned
on in a screen other than the map
screen, the "CAUTION" screen will be
displayed when the screen is changed
to the map screen for the first time after
it has been turned on.
MAINTENANCE INFORMATION
This system reminds users when to re-
place certain parts or components and
shows dealer information (if regis-
tered) on the screen.
When the vehicle reaches a previously
set driving distance or date specified
for a scheduled maintenance check,
the "Maintenance Reminder" screen
will be displayed when the navigation
system is turned on.
 This screen goes off if the screen is not
operated for several seconds.
 To prevent this screen from being dis-
played again, touch "Do Not Display
This Message Again".
 To register maintenance information,
see "MAINTENANCE" on page 121.
VENZA_Navi_OM73020U_(U)
13.05.13 14:12