Bluetooth ® Phone Message Function; Bluetooth Phone Message Function - Toyota Prius PHV 2019 Owner's Manual

7-1. Phone operation (Hands-free system for cellular phones)
®
Bluetooth phone mes-
sage function
Received messages can be for-
warded from the connected
®
Bluetooth phone, enabling
checking and replying using
the system.
Depending on the type of
®
Bluetooth phone connected,
received messages may not be
transferred to the system.
If the phone does not support
the message function, this
function cannot be used.
Displaying the message
screen
1
Display the phone top screen.
(P.190)
2
Select "Message".
 A confirmation message appears
when the "Automatic message
transfer" function is set to off
(P.213), select "Yes".
3
Check that the message screen
is displayed.
"Phone": Select to change to phone
mode.
 The account name is displayed
on the left side of screen.
 Account names are the names of
the accounts that exist on the
currently connected phone.
 The following functions can be
used on message function:
• Receiving a message (P.201)
• Checking received messages
(P.202)
• Checking sent messages (P.202)
• Create new message (P.203)
• Replying to a message (quick reply)
(P.203)
• Calling the message sender
(P.204)
• Message settings (P.213)
Receiving a message
When an e-mail/SMS/MMS is
received, the incoming message
screen pops up with sound and is
ready to be operated on the screen.
A
Select to check the message.
B
Select to not open the message.
C Select to call the message
sender.
●
Depending on the cellular phone used
for receiving messages, or its registra-
tion status with the system, some
information may not be displayed.
●
The pop-up screen is separately avail-
able for incoming e-mail and
SMS/MMS messages under the fol-
lowing conditions:
E-mail:
201
7