Table of Contents
Advertisement
Safety and Regulatory Information
General Safety Considerations
General Safety Considerations
Before Applying Power
If this product is not used as specified, the protection provided by
the equipment could be impaired. This product must be used in a
normal condition (in which all means for protection are intact) only.
The measuring terminals on this instrument are designed to be used with
external signals described in Measurement Category I, but NOT with
external signals described in Categories II, III, and IV. The input of this
instrument cannot be connected to the mains.
Servicing
These servicing instructions are for use by qualified personnel only.
To avoid electrical shock, do not perform any servicing unless you
are qualified to do so.
Operating Conditions
Operator is responsible for maintaining safe operating conditions. To
ensure safe operating conditions, modules should not be operated
beyond the full temperature range documented in the M937xA Data
Sheet (
Not maintaining safe operating conditions can result in shorter
module lifespans, improper module performance, and user safety
issues. If modules are allowed to exceed the specified full
temperature range, module surface temperatures can cause
discomfort or burns if touched. If a module exceeds the full
temperature range, always allow it to cool before touching it or
removing it from the chassis.
Keysight Technologies Startup Guide
http://literature.cdn.keysight.com/litweb/pdf/M9370-90002.pdf
).
27
Advertisement
Table of Contents
