Inspect For Damage - Keysight M9370A Startup Manual

Getting Started
STEP 1. Unpack and Inspect the Network Analyzer Modules
wrist-strap combination provides adequate ESD protection when used alone.
To ensure user safety, the static-safe accessories must provide at least 1
meg-ohm of isolation from ground.
Do NOT use these techniques for a static-safe work station when
working on circuitry with a voltage potential greater than 500 volts.
Figure 1-1 ESD protection setup
Unpack the network analyzer modules from the shipping containers. Keep the
black and red plastic port protectors and the shipping containers for possible
reuse.

Inspect for Damage

After unpacking a network analyzer module, inspect it for any shipping
damage. Report any damage to the shipping agent immediately, as such
damage is not covered by the warranty.
To avoid damage when handling the network analyzer modules, do not
touch exposed connector pins.
6 Keysight Technologies Startup Guide