Keysight M9370A Startup Manual page 10

Getting Started
STEP 3. Install the Software
Software Installation Procedure
1. Install the Keysight IO Libraries Suite by downloading it from
www.keysight.com/find/iosuite. Follow the installer prompts to install the
IO libraries.
2. Install the network analyzer module software by downloading it from
http://www.keysight.com/techicalsupport/main. Enter the model for your
instrument and click Find. Follow the installer prompts.
3. Complete the installation:
If Using an Embedded Controller:
If Using a Remote Controller:
Check for software updates at:
http://www.keysight.com/techicalsupport/main. Enter the model for your
instrument and click Find. Follow the installer prompts.
10
a. After the InstallShield Wizard has completed, click Finish.
b. Restart the embedded controller PC, using Start > Restart,
and wait for the system to restart.
a. After the InstallShield Wizard has completed, click Finish.
b. Shut down the remote controller PC, using Start > Shut
down.
c. Power down the chassis.
d. Power up the chassis.
e. Power up the remote controller PC.
Keysight Technologies Startup Guide