Removing Fan And Fan Motor - York HIDS006B21S Service Manual

MAINTENANCE
(Ducted Medium Static Type)
4.2.2.3

Removing Fan and Fan Motor

The indoor fan and the fan motor for (H,Y,C)IDM006 - 48B21S can be removed only from the bottom side.
(1) Remove the electrical box cover according to Section 4.2.2.2 "Removing PCB".
(2) Disconnect the connector for the fan motor located on the PCB2. Then remove the wiring.
(3) Remove the lower M4 screws securing the inlet flange.
Qty. of Screws (A): One (For (H,Y,C)IDM006 - 012B21S)
● (H,Y,C)IDM006 - 012B21S
● (H,Y,C)IDM015 - 048B21S
4-18
TURN OFF all POWER supply switches.
Two (For (H,Y,C)IDM015 - 048B21S)
Inlet Flange
Tool Phillips Screwdriver
Inlet Flange
M4 Screws (x (A))
M4 Screws (x (A))
SM-18001-rev.1