MAINTENANCE
TURN OFF all POWER supply switches.
4.2.2
Removing Fan and Fan Motor
The indoor fan and the fan motor can be removed only from the bottom side.
(1) Remove the electrical box cover according to Section 4.2.1 "Removing PCB".
(2) Disconnect the connector for the fan motor located on the PCB2. Then remove the wiring.
(3) Remove the seven M4 screws securing the rear lower cover at the fan motor side.
Tool
Phillips Screwdriver
Rear Lower Cover
M4 Screws (x 7)
4-4
SM-16005-rev.2