York HIDS006B21S Service Manual page 160

EXTERNAL INPUT/OUTPUT AND FUNCTION SETTING
(55) Automatic Reset of Setting Temperature (F3)
This function is utilized to economize the operation. When this function is valid, in the case that the
set temperature is not changed for certain period of time by the function (56) "Automatic Reset Time
(F4)", the set temperature automatically returns to (57/58) "Automatic Reset Temperature for Cooling/
Heating (F5/F6)" as following conditions. It is effective to optimize the setting temperature and provide
energy saving. However, the setting temperature is not automatically reset in the case that "Automatic
COOL/HEAT Operation" mode, or "Prohibiting Operation by Wired Controller" is set by the centralized
controller.
N Operation Mode
* COOL
* DRY
* FAN
N Operation Mode
* HEAT
<Example> Automatic Reset Temperature for Cooling is 77
(56) Automatic Reset Time (F4)
This function is utilized to set the automatic reset time with the set temperature.
The setting conditions and automatic reset time are as follows:
Setting Condition
00
01
02
03
(57) Automatic Reset Temperature for Cooling (F5)
This function is utilized to set the automatic reset temperature for FAN/COOL/DRY operation.
The setting conditions and the automatic reset temperature for cooling are as follows:
Setting Condition
66 (19)
68 (20)
70 (21)
72 (22)
74 (23)
76 (24)
77 (25)
78 (26)
80 (27)
82 (28)
84 (29)
86 (30)
5-30
Setting
Temperature Change
(56) Automatic Reset Time
Setting
Temperature Change
Automatic Reset Time of Setting Temperature
30 minutes (Factory-Setting)
15 minutes
60 minutes
90 minutes
Setting Temperature for Automatic Reset
o
66 F (19
o
68 F (20
o
70 F (21
o
72 F (22
o
74 F (23
o
76 F (24
o o
77 F (25 C) (Factory-Setting)
o
78 F (26
o
80 F (27
o
82 F (28
o
84 F (29
o
86 F (30
Return to (57) Automatic Reset
Temperature for Cooling
Return to (58) Automatic Reset
Temperature for Heating
o o
F (25 C)
o
C)
o
C)
o
C)
o
C)
o
C)
o
C)
o
C)
o
C)
o
C)
o
C)
o
C)
SM-18001-rev.1