Advanced Bios Setup, Continued; General Acpi Configuration; Suspend Mode; Repost Video On S3 Resume - Kontron CompactPCI CP6000 User Manual

CP6000 UG, ID 27942, Rev. 05
Advanced BIOS Setup,

General ACPI Configuration

Suspend Mode

Select the ACPI state used for System Suspend.

Repost Video on S3 Resume

Set this value to allow video repost support.
Option Description
No This setting prevents the video BIOS to be initialized coming out of the S3 state.
Yes This setting allows the video BIOS to be initialized coming out of the S3 state. Some video
controllers require this option to be enabled. This is the default setting.
Note: In some cases, the ACPI Setup screen will not appear even if the BIOS supports the
Advanced Configuration and Power Interface (ACPI).

S4 BIOS Support

Enable S4BIOS support if S4 (Hibernation) is not supported by OS.

Advanced ACPI Configuration

You can use this screen to select options for the ACPI Advanced Configuration Settings.
Use the up and down <Arrow> keys to select an item. Use the <Plus> and <Minus> keys
to change the value of the selected option. A description of the selected item appears on
the right side of the screen. The settings are described on this page. The screen is shown
below.

ACPI 2.0 Feature

Set this value to allow or prevent the system to be complaint with the ACPI 2.0
specification.
Option Description
No This setting prevents the BIOS from supporting the ACPI 2.0 specification.
Yes This setting allows the BIOS to support the ACPI 2.0 specification.

ACPI APIC Support

Include ACPI APIC table pointer to RSDT pointer list.

APIC ACPI SCI IRQ

Enable RSDP pointers to 64 Bit fixed System Description Table.

AMI OEMB Table

Include OEMB table pointer to R(X)SDT pointer list.
22
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Continued
Kontron Modular Computers GmbH
Chapter 3: Advanced BIOS Setup