Mains Connection - Maxxus LifePlate 4.0 User Manual

Mains Connection

Power Cable
Only use the power cable included in delivery to operate your training device. First,
attach the connector on the power cable to the connection at the back of the device.
Only then connect the mains plug on the power cable to the electrical supply socket. If
you want to remove the power cable from your device, first pull the mains plug out of the
electrical socket before disconnecting the power cable from the device.
CAUTION
Only connect your training device to grounded electrical socket installed by qualified
electrician. Do not plug this device into a power strip or cable reel.
When using cable extensions, these should comply with the regulations and guidelines
of the German VDE or equivalent and be labelled appropriately.
Mains Switch
After connecting the power cable correctly, you can switch your device on and off at the
main switch. To switch on the device, press the switch into position "I".
To switch off the device, press the switch into position "0".
Fuse
The fuse is located between the on / off switch and the mains connection socket. This is
a F 4A / 250V glass fuse. If renewal is necessary, remove the fuse cover using a suitable
flat head or Phillips screwdriver and remove the fuse. When replacing the fuse, make
sure that it is the correct type.
Attaching the Training Belts
Please attach the training belts to the brackets as shown in the following diagrams:
Recommended Accessories
This accessory is the optimum supplement to your training device. All products are avail-
able from our online shop at www.maxxus.de or direct from our showroom.
MAXXUS® Vibration Plate - Floor Protection Mat
Due to its extreme density and material thickness of 1.0cm, this mat optimally dampens
the vibrations and noise of the vibration plate during training. In addition, it also provides
perfect protection for floors and floor coverings against damaging, scratches and soiling
through body sweat.
Dimensions: 100 x 100 cm
14
Fuse
Main Switch
Mains connection socket