Safety Instructions - Maxxus LifePlate 4.0 User Manual

Safety Instructions

Please read and observe all sections of this Operating Manual. Thorough attention should always be paid to the safety
instructions, the maintenance instructions and the training information.
It is very important to adhere strictly to the maintenance and safety instructions and maintenance instructions contained in
this Manual.
This training device is only to be used for its intended purpose. If this equipment is used for any other purposes than intend-
ed, there is a possible risk of accident, damage to health or damage to the training device. The Distributor cannot be held
responsible in these circumstances.
Electrical Connection
− A mains voltage of 220-230V is required for the training operation of the device.
− The training device may only be connected using the supplied power cord to a grounded, individually protected 16 A
socket installed by a professional electrician.
− Always disconnect the electric plug from the power outlet if you want to change the location of the fitness device.
− Always disconnect the electric plug from the mains before carrying out any cleaning, maintenance or other work.
− Do not use socket strips or cable reels when connecting the electric plug to a socket.
− When using a cable extension, make sure that it complies with the guidelines and regulations of the VDE.
− Always lay the power cable in such a way that it cannot be damaged or cause a tripping hazard.
− Electrical appliances such as tablet PCs, smart phones, PC, TV (LCD, plasma, tubes, etc.), game consoles, etc.
send out electromagnetic radiation during their operation and in stand-by mode. Keep these devices away from your
exerciser as they may cause malfunctions, interference and incorrect information, especially during heart rate meas-
urement.
Training Environment
− Select a suitable space for your training device to provide an optimum amount of free space and highest level of safe-
ty. You should leave a free space of at least 150 cm behind, 150 cm to each side and a minimum of 100 cm in front of
the training device.
− Make sure that the area is well ventilated and that an optimum amount of oxygen is available during training. Avoid
draughts.
− Your training device is not suitable for outside use and so storage and training can only take place in a temperate,
clean dry room.
− Do not operate or store your training device in wet areas such as in swimming pools, saunas etc.
− Make sure that your training device is kept on flat, hard, clean ground both in operation and at rest. Any uneven surfac-
es must be removed or made good.
− It is recommended that a floor covering (carpet, mat, etc.) should be placed under the device to protect damageable
floors such as wood, laminates, floor tiles etc. Please ensure that this underlay cannot slip or slide.
− Do not put this training device on pale or white coloured carpets or rugs as the feet of the device may leave marks.
− Make sure that your training device and mains cable are kept out of contact with hot surfaces and are kept at a safe
distance from any sources of heat e.g. central heating, hot stoves, furnaces, ovens or open fires.
Personal Safety Instructions for Training
− The mains cable should be removed while the device is not in use to avoid any misuse or uncontrolled use by a third
party, for example, by children
− You should have a health check carried out by your doctor before you start any training
− Stop training immediately if you feel physically unwell or are experiencing any breathing difficulties.
− Always start your training session at a low workload increasing it slowly but steadily throughout. Reduce the workload
again towards the end of your training session.
− Suitable sports shoes and clothes should always be worn during training sessions. Make sure that loose clothes do not
get caught up in the treadmill belt or rollers.
− Your training device is only to be used by one person at a time.
− Check each time before a training session to see if your device is in perfect condition. Never use your training device if
it is faulty or defective.
− You are only permitted to carry out repairs to the device yourself after having contacted our Service Department and
on receipt of explicit permission to do so. Only original spare parts may be used at any time.
− Your training device must be cleaned after each use. Remove all dirt including body sweat or any other liquids.
− Always make sure that liquids (drinks, body sweat, etc.) do not get onto the vibrating plate or into the cockpit as this
can cause damage to the mechanical and electronic components.
− Your training device is not suitable for use by children. Children under 12 years are not permitted to use this device.
Children over 12 years are permitted to use the device but only under the supervision of an adult.
− Third parties, especially children and animals, must be kept at a safety distance of at least 3m from the device during
training.
− Check if there are any items underneath the training device before each training session and remove them without fail.
Never use the training device when items are underneath it.
− Do not allow children to use your training device as a toy or climbing frame at any time.
− Ensure that no body parts of your own or of third parties ever get into contact with any of the moving mechanisms.
The construction of this training device is based on state-of-the-art technology and highest modern technical safety stand-
ards. This training device is to be used by adults only! Extreme misuse and/or unplanned training can cause damage to
your health!
3
ENG