Maxxus LifePlate 4.0 User Manual page 5

Operating Instructions
Operating the Display
Before using this device please make sure that you or any other third party intending to
use the device has carefully read and familiarised themselves with the safety and operat-
ing instructions in this manual.
This product must be operated with a mains voltage of 220V-240V ~ 50 / 60Hz.
Always connect the power cable to the device first before connecting it to an electrical
socket. Only then should you switch on the device using the main switch.
Before disconnecting the device from the power supply, switch it off at the main switch
and then unplug the power cable from the electrical power socket. Only then should you
remove the power cable from the device if necessary. to switch the vibration plate on and
off. The device must first be switched on at the main switch.
Key Description
On/Off Mode – to switch the cockpit on or off. The device
must first be switched on at the main switch.
Interrupt the selected training program or training mode =
pause mode. To resume training, press the key again.
Increase the training level
Reduce the training level
Set the training time (increase the time)
Set the training time (reduce the time)
Select one of the three training modes:
Select the training program
5
ENG