X42 Terminal Strip; Drive-Cliq Interfaces X400, X401, X402 - Siemens SINAMICS S120 Equipment Manual

4.3.3.6

X42 terminal strip

Table 4- 16 Terminal strip X42 voltage supply for Control Unit, Sensor Module and Terminal Module
Terminal
1
2
3
4
Max. connectable cross-section 2.5 mm
The terminal strip is not intended for free 24 V DC availability (for example for supplying
further line-side components), as the voltage supply of the Control Interface Module could
also be overloaded and operating capability could thus be compromised.
4.3.3.7

DRIVE-CLiQ interfaces X400, X401, X402

Table 4- 17 DRIVE-CLiQ interfaces X400, X401, X402
PIN
1
2
3
4
5
6
7
8
A
B
Blanking plate for DRIVE-CLiQ interfaces (50 pcs.) order number: 6SL3066-4CA00-0AA0
Chassis Liquid Cooled Power Units
Manual, (GH7), 01/2011, 6SL3097-4AM00-0BP1
Function
P24L
M
2
CAUTION
Signal name
TXP
TXN
RXP
Reserved, do not use
Reserved, do not use
RXN
Reserved, do not use
Reserved, do not use
+ (24 V)
M (0 V)
Technical specifications
Voltage supply for Control Unit, Sensor Module and
Terminal Module (18 to 28.8 V)
maximum load current: 3 A
Technical specifications
Transmit data +
Transmit data -
Receive data +
Receive data -
24 V power supply
Electronics ground
Line Modules
4.3 Active Line Modules
119