Connecting The 24 V Terminal Adapter - Siemens SINAMICS S120 Manual

Further information can be found in the SINAMICS S120 Manual "Booksize Power Units".
NOTICE
DC link rectifier adapters for 45 A and 60 A modules burning
No appropriate DC link rectifier adapters are available for 45 A and 60 A Motor Modules,
Booksize C type. The adapter (6SL3162-2BD00-0AA0) used for the 100 mm wide Booksize
modules are not adequately dimensioned for the current.
• For 45 A and 60 A Motor Modules, Booksize C type, do not feed in the DC link voltage
DC link adapter
Using the DC link adapter, it is possible to distribute a drive line-up over several tiers in the
control cabinet.
Further information about the DC link adapter and multi-tier configurations can be found in
chapters "Accessories / DC link adapter" and "Control cabinet design / Arrangement of
components and equipment" in the SINAMICS S120 Manual "Booksize Power Units".
6.6.6

Connecting the 24 V terminal adapter

The 24 V voltage can be supplied to or tapped from a component by means of the 24 V
terminal adapter.
The 24 V terminal adapter can be installed in every Line Module, Motor Module, and Control
Supply Module.
● Connectable cable cross-sections: 0.5 to 6 mm
● Tightening torque: 1.2 ... 1.5 Nm (16 lbf in)
24 V terminal adapter
Further information can be found in the SINAMICS S120 Manual "Booksize Power Units".
Power Units in Booksize C/D-Type Format
Manual, 12/2018, 6SL3097-5AC20-0BP0
via a DC link rectifier adapter.
6.6 Electrical connection
(AWG 20 ... 8)
2
Article No.
6SL3162-2AA00-0AA0
Cabinet design
113