Garland MWE2W Installation, Operation & Service Manual page 42

INSTALLATION/OPERATION & SERVICE MANUAL - 1&2 PLATEN
CONTROL PROGRAMMING
To change the grill upper platen set point temperature
NOTE: Grill temperature set points are preset in the controller to the
currently required standard. You should not change this set point to any
temperature other than what is shown in section "OPERATING
PROCEDURES".
1. Using the or button, select the menu item that
requires a temperature change.
2. PRESS and HOLD the
seconds. Controller will display previously selected
menu item and its corresponding item number.
3. PRESS the button. The controller will display
"Product".
4. PRESS the or button until "Platen SetPt" is
displayed on the controller.
5. PRESS the button. The "PLATEN SET POINT" will
begin to fl ash.
6. Using the or button, change the temperature set
point to the new desired temperature.
7. PRESS the button to save the new temperature.
8. PRESS the 2X to return to normal operating mode.
To Change the MUST REMOVE IN time
1. Using the or button, select the menu item that
requires a cook time change.
2. PRESS and HOLD the
seconds. Controller will display previously selected
menu item and its corresponding item number.
3. PRESS the button. The controller will display
"Product".
4. PRESS the or button until "Must Remove In" is
displayed on the controller.
5. PRESS the button. The seconds will begin to fl ash.
6. Using the or arrow buttons to change the Must
Remove In time to the new desired time.
7. PRESS the button to save the new time.
8. PRESS the 2X to return to normal operating mode.
Page 42
button for approximately 3
button for approximately 3
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION
(continued)
To Change the Toast Buns time
1. Using the or
requires a cook time change.
2. PRESS and HOLD the
seconds. Controller will display previously selected
menu item and its corresponding item number.
3. PRESS the button. The controller will display
"Product".
4. PRESS the or
displayed on the controller.
5. PRESS the button. The seconds will begin to fl ash.
6. Using the or
to the new desired time.
7. PRESS the button to save the new time.
8. PRESS the 2X to exit and return to normal operating
mode.
To Change the Toast Buns Alarm (Auto / Manual)
1. Using the or
that requires a cook time change.
2. PRESS and HOLD the
seconds. Controller will display previously selected
menu item and its corresponding item number.
3. PRESS the button. The controller will display
"Product".
4. PRESS the or
displayed on the controller.
5. PRESS the button. The "AUTO" or "MANUAL" will
begin to fl ash.
6. Using the or
"MANUAL" to "AUTO" or "AUTO" to "MANUAL".
7. PRESS the button to save the new setting.
8. PRESS the 2X to exit and return to normal operating
mode.
button, select the menu item that
button for approximately 3
button until "Toast Buns Time" is
button, change the Toast Buns Time
arrow buttons, select the menu item
button for approximately 3
button until "Toast Buns Alarm" is
arrow buttons to change the
PART #4527466 (12 Aug 2011)