Garland MWE2W Installation, Operation & Service Manual page 23

GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION
INSTALLATION & STARTUP
7. Draw a line joining the
endpoints of the low
and high reference
lines. At the midpoint
of this new line make
a mark.
8. Rotate air shutter at the midpoint mark and verify
that the fl ame is stable on the burner surface without
lifting or discoloration. If the fl ame is stable, tighten
the butterfl y nut..
PART #4527466 (12 Aug 2011)
INSTALLATION/OPERATION & SERVICE MANUAL - 1&2 PLATEN
(continued)
9. If the fl ame is still abnormal, make another mark 1/16"
away from the butterfl y along the joining line and
rotate the butterfl y to this position. This will reduce
the air fl ow. Veryfi y the fl ame stability and tighten
butterfl y nut.
Page 23