Indicator Lights; Standby Mode; To Display The Current Temperatures; Breakfast In Manual Mode - Garland MWE2W Installation, Operation & Service Manual

INSTALLATION/OPERATION & SERVICE MANUAL - 1&2 PLATEN
OPERATING PROCEDURES

Indicator Lights

The LED lights on the main control indicate the
temperature status of each zone.
Electric grills have (4) zones per section , TOP, (platen),
BACK GRILL, MIDDLE GRILL, and FRONT GRILL.
Gas grills have (2) zones per section , TOP, (platen),
and GRILL.
RED – The zone(s) is "TOO HOT" (more than 79˚F/43˚C over
set temperature) OR a heat zone failure has occurred.
AMBER – The zone(s) is calling for heat.
GREEN – The zone(s) is at or above set temperature, but
below 79˚F/43˚C over set temperature.

Standby Mode

To enter the standby mode:
1. Press the button. The upper platen will lower, and
the grill will maintain a set temperature of Upper platen
- 425˚ F (218˚C), Grill Surface - 350˚ F (177˚C).
To Exit the standby Mode:
1. Press the GREEN or (
button(s). The upper platen will raise.

To display the current temperatures:

1. Press the button and repeat for each zone to be
displayed:
1st key press – Front Set Point
2nd key press – Front Actual
3rd key press – Mid Set Point
4th key press – Mid Actual
5th key press – Back Set Point
6th key press – Back Actual
7th key press – Platen Set Point
8th key press – Platen Actual
2. Pressing and holding the
will display all of the current temperatures at once.

Breakfast In Manual mode

1. Select AM mode. Press and hold the
2. Select Manual mode. Press and hold the the
3. Select a product from the AM product library using the
or arrow buttons.
4. Following McDonalds procedures for the item selected,
load product on the grill.
5. Press the GREEN or (
button(s) to initiate a cook cycle.
Page 34
GREEN & BLACK) push-
button for fi ve (5) seconds
button.
button.
GREEN & BLACK) push-
GARLAND CLAMSHELL GRILLS WITH PRODUCT RECOGNITION
(continued)
6. Alarm will sound when the cook cycle is complete.
7. Remove product and clean grill to prepare for the next
cook cycle.

Lunch In Manual mode

Note: Switching from breakfast to lunch menu items will
take approximately 10 minutes to heat to the appropriate
temperatures.
1. Select PM mode. Press and hold the
2. Select Manual mode. Press and hold the
3. Select a product from the PM product library using the
or arrow buttons.
4. Following the below lay pattern, load product on the
grill.
5. Press the GREEN or (
button(s) to initiate a cook cycle.
6. Alarm will sound when the cook cycle is complete
7. Remove product and clean grill to prepare for next
cook cycle.

To Change The Cook Time for a Menu Item

1. Select AM or PM mode. Press and hold the
2. Select Manual mode. Press and hold the
3. Select a product using the
4. PRESS the
5. Use the and
6. The control will automatically default back to the
normal operating mode after 3 seconds.

Breakfast In Auto mode

1. Select AM mode. Press and hold the
2. Select Auto mode. Press and hold the
control will display "AM / AUTOMATIC"
3. Following McDonalds procedures for the item selected,
load product on the grill.
4. Press the GREEN or (
button(s) to initiate a cook cycle. The platen will lower,
and recognize the product that has been loaded on the
grill.
5. Alarm will sound when the cook cycle is complete.
6. Remove product and clean grill to prepare for the next
cook cycle.
GREEN & BLACK) push-
or arrow buttons.
button to display the cook time.
buttons to change the cook time.
GREEN & BLACK) push-
button.
button.
button.
button.
button.
button. The