Power-Up Mode Page; Unlocking The Recorder; Media Erase & Format Page; To Format A Card - Zaxcom ZFR100 User Manual

Zaxcom Miniature Digital Recorder User's Manual____________________________________Chapter 2

Power-up Mode page

POWER UP MODE:
UNLOCKED
Page purpose:
Parameters:
 LOCKED
 UNLOCKED
This page works like the
Mode, every time it is powered up, the keys will be locked and it will be necessary to unlock them before you can
view/change anything.

Unlocking the recorder

Simultaneously press the MENU and INC keys. Once it is unlocked, the screen will display the
Control page
Media Erase & Format page
PRESS UP KEY 5X
TO ERASE CARD
SUCCESS (REBOOT)
#### MBYTES
FORMAT FAILED
ERROR ##
Page purpose:
This must be done before the card can be used (or to erase the contents) in the recorder.

To Format a card:

1. Before formatting the card, enter the name
2. With the power „OFF‟, insert the memory card into the media slot with the label to the back of the unit. Press
it all the way in; it will lock down.
3. Press and hold the MENU key while the recorder is powered up.
4. Repeatedly press the MENU key until the screen displays
5. Press the INC key 5 times. (displays
6. Sometime later displays
7. And finally displays
indicates the space on the card available for recording and
Be sure the recorder displayed
If the recorder displayed
8. Once the Success message (see above) appears, you will need to reboot so the unit can mount the card.

To Recreate the wrapper files (will not destroy existing audio takes):

Repeat each of the steps above, but substitute the following for step 5:
5. Press the DEC key 9 times. (displays
This page sets whether or not the unit will power up with the keys locked
– The keys are locked upon power-up.
– The keys are unlocked upon power-up.
Lock page {p.21}. The only difference is that while the unit is locked using Power-up
{p.18}.
This page erases and formats a MiniSD card.
ERASING SEGMENTS
SUCCESS #### MBYTES
Error Code
SUCCESS #### MBYTES
FORMAT FAILED ERROR ##
(Track Name page
PRESS UP KEY 5X TO ERASE CARD
FORMATTING FAT32
.
FORMAT FAILED ERROR ##
or
##
is one of the following error codes:
Description
- 1 No SD card found
- 2 No FAT32 format found
- 3 Invalid SD card sector size

Table 2-7 Format Error Codes

FORMATTING FAT32
25
{p.29}) to be used for this card.
)
before using it to record.
, do not use the card in the recorder.
)
Transport
.
####
, where