Common Recorder Extended Menu; Extended Startup Sequence (Without Any Card Inserted); Extended Startup Sequence (With A Formatted Card Inserted); Entering The Extended Menu - Zaxcom ZFR100 User Manual

Chapter 2____________________________________Zaxcom Miniature Digital Recorder User's Manual

Common Recorder Extended Menu

These menu pages contain parameters that are infrequently changed.

Extended Startup Sequence (without any card inserted)

LCD
SYNTH AB
PCB REVB
VER A-AAA
***NO CARD***
EXT MENU
A-AAA
ZAXCOM
ZFR100
EXTENDED MENU
PRESS UP TO EXIT

Extended Startup Sequence (with a formatted card inserted)

LCD
SYNTH AB
PCB REVB
VER A-AAA
FOUND SD CARD
PCB REVB
EXT MENU
A-AAA
FOUND F SEGS
MODE=GGGGGGG
ZAXCOM
ZFR100
EXTENDED MENU
PRESS UP TO EXIT

Entering the Extended Menu

Method 1.
1. Power down the recorder.
2. Press and hold the MENU key while powering up the unit.
Method 2.
1. Ensure the unit is turned „ON‟ and in the Standard Menu.
2. Press the MENU key several times to get to the
3. Press the DEC key six times (the Factory Setup Menu is displayed).
4. Press the INC key once (the Extended Menu is displayed).
BBBB
(CC)
MMM DD
MMM DD (
HH:MM:SS
HH:MM:SS (
VA-AAA
SN:ZZZZZ
BBBB
(CC)
BBBB
MMM DD
HH:MM:SS
VA-AAA
SN:ZZZZZ
– indicates the month and day the installed firmware was created.)
– indicates the time of day the installed firmware was created.)
LOCK
page.
22