Activating The Bus Door Loudspeaker - SSS Siedle AIB 150 Series System Manual

7.1 Programming – manual

Activating the bus door loudspeaker

Depending on the type of door sta-
tion, the programming mode has to
be activated in a different way.
1 Siedle Vario
In the case of door loudspeaker
module BTLM 650-... the program-
ming mode is activated using the
light button. Hold down the light
button for 4 seconds until a pro-
tracted signal tone is audible.
4 Siedle Steel
The programming button is only
accessible with the operating panel
removed. To actuate the program-
ming button, use the blunt end of
the plastic key inserted in the inspec-
tion shaft cover.
Hold down the light button for
4 seconds until a protracted signal
tone is audible.
88
2 Siedle custom-fit door loud-
speaker
In the case of the BTLE 050-... the
programming mode is activated
using the programming button. Next
to the terminal, hold down the pro-
gramming button for 4 seconds until
a protracted signal tone is audible.
3 Siedle Classic
CL V xx B-02 is set to the program-
ming mode by actuating the pro-
gramming button behind the front
panel. Hold down the light button
for 4 seconds until a protracted
signal tone is audible.