SSS Siedle AIB 150 Series System Manual page 84

7 Programming
Overview of functions
Dialling last door
The door station from which the last
door call was placed can be dialled
by double clicking the light button.
Automatic call acceptance
The handsfree indoor device auto-
matically picks up incoming internal
calls and switches on the speech
connection.
BSE Groups
Several bus switching units are
assigned to a group. This allows sev-
eral BSE 650-... units to be executed
simultaneously with one switching
contact, e.g. shutter control.
Storey call
The storey call button (ERT) is used
to call into the apartment from an
apartment door. Application e.g.
apartment building with 4 apart-
ments and a common staircase.
Storey call buttons are installed in
front of every apartment front door.
Group formation
Several bus indoor devices are
assigned to a group.
This allows up to 8 bus indoor
devices to be called with one button.
A bus indoor device can belong to
up to 4 different groups.
Intercom
The term Intercom denotes internal
communication within one building.
Using handsfree bus indoor devices,
intercom communication is par-
ticularly simple and convenient, as
it does not require a receiver to be
lifted.
84
Internal call
Bus indoor devices can place calls to
each other using the buttons.
Using the standard indoor device,
4 users can be called. The deluxe
indoor devices are able to call up to
14 users. Internal calls are only pos-
sible within a line.
Internal group call
Internal call to several indoor devices
simultaneously. The device which
initially establishes the connection
has the call.
Light button
In the as-delivered status, the light
button in the bus indoor device
switches the contact in the bus
line rectifier for 0.4 seconds. Using
the bus programming software
BPS 650-... this time can be altered.
The function of the light button can
be reprogrammed, e.g. for internal
calls.
Camera step
At the button of a bus indoor device
BTCV/BFCV/BVPC 850-... it is pos-
sible to dial up to 8 door stations
with video or external cameras in
sequence. With each actuation,
the picture from the next camera is
displayed.
Secondary signal unit
The interfacing relay accessory is
available for bus telephones BTS/
BTC 850-... for actuating a signalling
device or a lamp. For BFC 850-...
use accessory ZARF 850-... A bus
secondary signal unit BNS 750-...
can be programmed in parallel to a
bus indoor device.
Parallel device
Max. 8 bus indoor devices can ring
simultaneously when actuating a
doorbell button.
Call silencing and display
The call can be switched off at the
bus indoor devices. Deactivation is
signalled at the device.
Call tone configuration
At each bus indoor device, different
call tones can be selected for every
call type (door call, internal call,
storey call).
Receive callback
If you are available to accept an
internal call, a callback can be
requested. This is optically signalled
at the deluxe indoor device. This
function can be programmed at all
deluxe bus indoor devices.
Set call-back
If you make an internal call and
the user does not pick up, you can
request a callback. To do this, press
the flashing button twice.
Collective announcement
Paging announcement to one or
more deluxe handsfree devices. Can
be used for instance for making an
announcement in a waiting room or
for searching for individual personnel
in a building.
Status display (via LED)
The supplementary devices bus
switching module BSE 650-... and
bus input module BEM 650-... send
feedback signals to the In-Home
bus. These can be displayed at the
bus indoor devices, e.g. whether the
garage door is open.
Control function
The supplementary devices bus
switching unit BSE 650-..., bus
input module BEM 650-... and bus
switching module BSM 650-... can
execute different switching and
control functions for individual
operations.