SSS Siedle AIB 150 Series System Manual page 53

Siedle Steel
Functional
Calling, speech and video functions
between door station and the
connected bus indoor devices with
colour display.
Audio and video privacy of existing
calls from other bus indoor devices is
assured. Door release button for the
door release function, light button
for the light switching function.
Pressing the monitor button will
show the camera picture from the
door station which placed the last
door call. This function is only pos-
sible if no call exists.
Connection of a storey call button
(ERT) for calling from an apartment
door. Ringtones can be selected for
calls from the front door, apartment
door or internal calls.
Connection of other bus indoor
devices with colour display when
looping through from one device to
the next.
Other bus door loudspeakers with
video are connected with bus
video distributors BVVU 650-... or
BVVS 650-...
Supplementary functions
• Internal speech communication
between bus indoor devices is only
possible internally within the same
line.
• Connection of bus telephones
AIB 150-.../BTS/BTC/BFC 850-... or
devices for switching and control
functions via bus audio decoupler
BAA 650-...
For more information, see
page 64
• Switching and control functions
are possible with the bus switching
modules BSM/BSE/BEM 650-...,
feedback to the deluxe bus indoor
devices can be programmed.
For more information, see
page 123
• Bus secondary signal unit
BNS 750-... possible.
For more information, see
page 132
• Parallel door and storey call
Up to 8 bus indoor devices with
colour display can be called simulta-
neously via one call button. From the
second bus telephone VIB 150-.../
BTSV/BTCV/BFCV 850-... each
device must be additionally supplied
at terminals +M/–M.
Only possible within a line.
• Selective dialling of the door
station possible via additional free
buttons.
• Video memory function
possible with bus indoor devices
BVPS/BVPC 850-... and BTCV/
BFCV 850-..., additional installation
required (for BTCV/BFCV 850-...).
Remarks
a) The TR 603-... (12 V AC, 1.3 A)
can supply the door release, camera
heating and max. 200 bus call
buttons.
Where more call buttons are used,
an additional TR 603-... is required
for the door release.
b) Door release/light contact load
in the bus video line rectifier
BVNG 650-... max. 15 V AC,
30 V DC, 2 A.
c) Door release 12 V AC, use at least
20 Ohm (e.g. TÖ 615-...).
For more information, see
page 126
d) Conductor length bus indoor
device – storey call button ERT max.
50 m.
e) When using the video memory
module, the bus telephone BTCV/
BFCV 850-... must be supplied
by an additional direct voltage
(20–30 V DC, 350 mA). VNG 602-...
can be used for this purpose.
For more information, see
page 128
53