SSS Siedle AIB 150 Series System Manual page 27

PRI 602-0
Programming interface for con-
nection of a Windows PC via serial
interface to the Vario bus. The Vario
bus is programmed using program-
ming software PRS 602-..., provided
with the delivery. If the BIM 650-...
is additionally used, the In-Home bus
can also be programmed.
DCA 650-02
DoorCom-Analog for connection of
one or more door stations to an ana-
logue PBX extension of a telephone
system. Up to 31 call numbers can
be stored.
The call can be made using bell but-
tons or the display call module from
the door station. Power supply with
12 V AC to terminals b and c, con-
nection to the In-Home: Video only
via BAA 650-...
PRI 602-01 USB
Programming interface for con-
nection of a Windows PC via USB
port to the ZBVG 650-... interface.
The ZBVG 650-... is plugged into
bus line rectifier BNG/BVNG 650-...
Commissioning, programming and
servicing facility for the In-Home bus
using BPS 650-... software.
BLC 250-0
Licence for an additional IP user at
the Smart Gateway (SG 650-...).
Purchase orders can be placed via
the "My Siedle" service portal:
www.siedle.com/mysiedle
The licence is linked to the hard-
ware. If a Smart Gateway fails, Siedle
transfers all licences purchased
within the last 2 years free of charge
to an identical substitute device
(investment protection).
BPS 650-0
Bus programming software for
programming In-Home bus systems.
For this, the programming interface
PRI 602-... is also required in con-
junction with a BIM 650-... or the
PRI 602-... USB.
27