SSS Siedle AIB 150 Series System Manual page 129

VNG 602-... BTSV 850-...*
1. device
Power supply with VNG 602-...
BTSV 850-.../VIB 150-..., 300 mA
Operating mode NORM
Operating mode NORM, cable J-Y(St)Y
Operating mode increased range
BTCV/BFCV 850-..., 350 mA
Operating mode NORM
Operating mode NORM, cable J-Y(St)Y
Operating mode increased range
LNG 600-... BVPS 850-...
1. device
Power supply with LNG 600-...
BVPS/BVPC 850-...
VIB 150-... BTCV 850-...
2. device 3. device
Max. conductor length/Distance of the supplementary supply
1 device 2 device
100 m* 100 m
150 m* 150 m
200 m*** 140 m
1 device 2 device
100 m* 100 m
150 m* 150 m
200 m*** 140 m
BVPC 850-... BVPS 850-...
2. device 3. device
Max. conductor length/Distance of the supply
1 device 2 device
200 m 120 m
A maximum of 3 VIB 150-.../BTSV/
BTCV/BFCV 850-... units can be
supplied by a NG 602-... line rec-
tifier. The maximum current of the
30 V DC direct voltage from the
VNG 602-... is 1100 mA. The speci-
fied ranges only apply to the external
power supply to the devices, not
to the ranges of the In-Home bus.
Ranges applicable for J-Y(St)Y or YR
installation cable with 0.8 mm core
diameter! Only bus indoor devices
BFCV 850-...
which are located in the same line
4. device
can be supplied by one line rectifier.
3 device
100 m
140 m
100 m
3 device
100 m
140 m
100 m
A maximum of 3 BVPS/BVPC 850-...
devices can be supplied by one
power line rectifier LNG 600-.... The
maximum current of the 30 V DC
direct voltage from the LNG 600-...
is 1100 mA. The specified ranges
only apply to the external power
supply to the devices, not to the
ranges of the In-Home bus. Ranges
applicable for J-Y(St)Y or YR instal-
lation cable with 0.8 mm core diam-
eter! Only bus indoor devices which
are located in the same line can be
supplied by one line rectifier.
3 device 4–8 device
70 m Further additional power supply
4 device
100 m
100 m
not possible
4 device
100 m
100 m
not possible
129