Monitoring And Accessing Another Phone - Cisco SPA 504g User Manual

Monitoring and Accessing Another Phone

Your system administrator can configure your phone so that you can monitor other phones on the
network from your phone if the feature is available on your system. If this feature is configured, some
line buttons on your phone are assigned to display the status of another user phone. For example, if
your line 4 is configured to display Bob's phone line, the button color shows you the status of that phone
line:
Green: Line is idle.
•
Red (steady): Line is active or in use.
•
Red (blinking): Line is ringing.
•
Orange (solid): Line status cannot be monitored.
•
Orange (blinking): The phone is subscribing to monitor the line status.
•
In addition, if your system administrator has configured it, you can press the same line button (4) to
speed dial Bob's extension, or to pick up a ringing call at his extension.
NOTE User cannot configure BLF on the SPA502G and SPA512G phones as they have only 1 line and
no line buttons, but the BLF function can be configured on the attendant console.
50