System expansions
Remove the M.2 module on the front panel module (optional)
► Open the casing (see
► Remove the front panel module (see
► Undo the screw (1).
► Pull the M.2 module (b) at a slight angle in the direction of the arrow (2) out
of the slot (a) on the front panel module.
► For safe keeping, secure the screw for retaining the M.2 module on one of the
associated stud bolts on the front panel module.
► Install the front panel module (see
► Close the casing (see
If necessary, you must adjust the entry for the M.2 module accordingly in the BIOS Setup.
84
"Open the casing", Page
"Removing the front panel module", Page
"Installing the front panel module", Page
"Close the casing", Page
43).
a
44).
51).
1
2
b
53).
Fujitsu