Connecting Display Adapters With Additional Power Supply - Fujitsu CELSIUS M770 Operating Manual

Connecting display adapters with additional
power supply
Fujitsu recommends ordering display adapters (GFX) together with the system so that
they have been installed and tested in the factory. This guarantees that the wiring
meets the requirements of the respective GFX card.
For systems that are supplied without a GFX card, a standard GFX cable is enclosed in the system
accessories pack. This enables the use of a GFX card with 6 and/or 8-pin connectors.
If you require other cables, you can purchase these from Fujitsu. The power supply (PSU)
installed in the system can supply a continuous 18.5 A for display adapters via any power
supply. Ensure that your display adapter(s) do not require higher power levels.
Device variants
CELSIUS M770
CELSIUS M770power
Fujitsu
Nominal power of the power
supply unit (PSU)
450 W
800 W
System expansions
Number of supported
graphics cards with GFX port
1
2
89