Connecting external devices
Read the documentation on the external device before connecting it.
With the exception of USB devices, always remove all power plugs
before connecting external devices!
Do not connect or disconnect cables during a thunderstorm.
Always take hold of the actual plug when disconnecting a cable. Never pull the cable!
To ensure that your device works properly, use only the supplied connection
cable or only use a high-quality connection cable.
Ports on the device
Ports
Externaldevices
Device
The ports are located on the front and back of the device. The ports available on your
device depend on the configuration level you have selected. The standard ports are
marked with the symbols shown below (or similar). Detailed information on the location
of the ports is provided in the manual for the mainboard.
Headphones, light green (back
of device) or black (front of
device)
Headphones
Audio output (Line out), light
green
Lineout
Audiooutput
USB 3.1 - Universal Serial Bus,
Gen 1 Type A: blue, Gen 2
Type C
USB Type 3.0 - Universal Serial
Bus: black
USB Type 2.0 - Universal Serial
Bus: black
UniversalSerialBus
Some of the connected devices require special software (e.g. drivers) (refer to the
documentation for the connected device and operating system).
Fujitsu
: black
TM
Microphone port, pink (back of
device) or black (front of device)
Microphonejack
Audio input (Line in), light blue
Linein
Audioinput
LAN port
LAN
LANport
Getting started
19