Remove And Secure The Front Panel - Fujitsu CELSIUS M770 Operating Manual

Remove and secure the front panel

Removing the front panel
It should not be necessary to remove the front panel for the usual system expansions.
If this should however become necessary at one point or you are asked to do so
by the Service Department, proceed as follows:
► Remove the front panel module (see
► If present: Remove the UltraSlim drive (see
► If present: Remove the accessible 5
► If present: Remove the 3½ inch or 2½ inch reader (see
module holder with reader", Page
The front panel is connected to the casing by three catches each on the left and right sides.
1
1
1
► Gently press in the catches on one side of the front panel (1).
► Unhook the catches from the guide openings (a) on the opposite side (b) of the casing (2).
► Remove the front panel from the casing.
Fujitsu
"Removing the front panel module", Page
"Removing an accessible drive", Page
/ inch drive (see
1
4
62).
2
2
2
"Removing an accessible drive", Page
"Removing a
2
System expansions
51).
67).
72).
a
b
49