Removing The M.2-Module On The Mainboard - Fujitsu CELSIUS M770 Operating Manual

System expansions

Removing the M.2-module on the mainboard

► Open the casing (see
► Remove the boards (see
► Undo the screw (1).
► Pull the M.2 module (b) slightly at an angle in the direction of the arrow (2) and out
of the slot (a) on the mainboard and remove it from the casing.
► For safe keeping, secure the screw for retaining the M.2 module on one of
the associated stud bolts on the mainboard.
► Install the boards (see
► Close the casing (see
If necessary, you must adjust the entry for the M.2 module accordingly in the BIOS Setup.
82
"Open the casing", Page
"Removing a board", Page
"Installing a board", Page
"Close the casing", Page
43).
85).
1
b
87).
44).
a
2
Fujitsu