Related Manuals for Fujitsu ESPRIMO D70 Series
Summary of Contents for Fujitsu ESPRIMO D70 Series
- Page 1 System Operating Manual FUJITSU Desktop / Workstation ESPRIMO D70xx / D90xx CELSIUS J50xx...
- Page 2 Thank you for buying an innovative product from Fujitsu. Latest information about our products, useful tips, updates etc. is available on our website: "http://www.fujitsu.com/fts/" You can find driver updates at: "http://support.ts.fujitsu.com/download" Should you have any technical questions, please contact: •...
- Page 4 Issued by / EU importer Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 Munich, Germany "http://www.fujitsu.com/fts/" Copyright © Fujitsu Technology Solutions GmbH2020. All rights reserved. Publication Date 08/2020 Order No.: A26361-K1680-Z320-1-7619, edition 1...
- Page 5 FUJITSU Desktop / Workstation ESPRIMO D70xx / D90xx CELSIUS J50xx Operating Manual Your ESPRIMO / Your CELSIUS Important notes Device overview Getting started Connecting external devices Installing the cable cover (optional) Switching on for the first time: installing the software...
- Page 6 Information on the product description meets the design specifications of Fujitsu and is provided for comparison purposes. Several factors may cause the actual results to differ. Technical data is subject to change without prior notification. Fujitsu rejects any responsibility with regard to technical or editorial mistakes or omissions.
-
Page 7: Table Of Contents
Anti-theft protection and lead-sealing ..........30 Locking the assy mechanically (FUJITSU Desktop ESPRIMO D7010 / D9010 only) ..31 BIOS setup security functions . - Page 8 Index ................. . 41 Fujitsu...
-
Page 9: Your Esprimo / Your Celsius
• • in the document "Data deletion" Validity of the Reference Manual This reference manual applies to the following systems: • FUJITSU Desktop ESPRIMO D7010/8 • FUJITSU Desktop ESPRIMO D7010 • FUJITSU Desktop ESPRIMO D9010 • FUJITSU Workstation CELSIUS J5010... -
Page 10: Notational Conventions
"Safety information" • cross-references to an external source, e.g. a web address: For more information, go to "http://www.fujitsu.com/fts" • Names of CDs, DVDs and titles or designations for other materials, e.g.: "CD/DVD Drivers & Utilities" or "Safety/Regulations" manual indicates a key on the keyboard, e.g:... -
Page 11: Important Notes
Clean the optional dust filter of the system at regular intervals (see chapter "Clean/replace dust filter", Page 38). Energy saving, disposal and recycling Disposal Energysaving Recycling Drivers& UtilitiesDVD User DocumentationDVD You can find information on these subjects in the "Environment and Energy Information" manual or on our website ("http://www.fujitsu.com/fts/about/fts/environment-care/"). Fujitsu... -
Page 12: Device Overview
7 = Bay for slimline drive 8 = On/off switch with operation indicator (see "Indicators on the device", Page 9 = Hard disk display (see "Indicators on the device", Page 10 = Connections, depending on the configuration level (see "Ports on the device", Page Fujitsu... -
Page 13: Rear
2 low-profile slots (FUJITSU Desktop ESPRIMO D7010, D9010 and FUJITSU Workstation CELSIUS J5010, option 1) • 1 low-profile slot and 1 full-height slot (FUJITSU Desktop ESPRIMO D7010, D9010 and FUJITSU Workstation CELSIUS J5010, option 2) The FUJITSU Desktop ESPRIMO D7010, D9010 and FUJITSU Workstation CELSIUS J5010 also have Flex I/O with one of the following connection types: •... - Page 14 Device overview For example: FUJITSU Desktop ESPRIMO D7010, D9010 and FUJITSU Workstation CELSIUS J5010 with two low-profile slots and a Flex I/O USB type C: The connections on the device depend on the ordered variant and its configuration level, and can therefore defer from the example below.
-
Page 15: Indicators On The Device
Device overview Indicators on the device Indicators, Device The indicators are on the front of the casing. Thee displays available for your device depend on the variant and configuration level selected. Fujitsu... - Page 16 ON/OFF switch, the device powers up or returns to the state it was in before it entered energy-saving mode. • The indicator is not lit: The device is switched off. Hard disk indicator The indicator lights up when the hard disk drive in the device is being accessed. Fujitsu...
-
Page 17: Getting Started
Drives and boards If you have received drives or boards as well as your device, please do not install them until after first-time setup. Installation of drives and boards is described in the "System expansions and repairs" manual. Fujitsu... -
Page 18: Setting Up The Device
You can use the device in a vertical or horizontal operating position. With the aid of suitable feet, it is possible to use the device in a vertical operating position "Vertical operating position with feet (optional)", Page 15). (see Fujitsu... -
Page 19: Vertical Operating Position With Feet (Optional)
Use the optional feet when you wish to use the device in the vertical operating position. The set-up direction is compulsory: The labels "FUJITSU" and "ESPRIMO" or "CELSIUS" must be at the top to ensure that sufficient ventilation is provided. - Page 20 Getting started ► Set up the device in such a way that the screw holes for the feet point upwards. ► Fix the first foot with the screws (2). ► Secure the second foot in position (3) with the screws. Fujitsu...
- Page 21 When installing the device with only part of the feet, make sure not to cover its ventilation slots. ► To separate the feet and to place the device as close as possible to the wall, remove part (4) of both feet. Fujitsu...
- Page 22 Getting started ► Stand the device on the feet as shown. Fujitsu...
-
Page 23: Connecting The Device To The Mains Supply
Russia and the Commonwealth of Independent States (CIS), large parts of Europe, parts of South America, the Middle East, parts of Africa, Hong Kong, India, large parts of South Asia. UK, Ireland, Malaysia, Singapore, parts of Africa China, Australia, New Zealand Fujitsu... -
Page 24: Connecting External Devices
Do not connect or disconnect cables during a thunderstorm. Always hold the plug of a cable when removing it. Never unplug a cable by pulling the cable itself. To ensure that your device works properly, use only the connection cable supplied or use a high-quality connection cable. Fujitsu... -
Page 25: Ports On The Device
Socket type C black: Universal Serial Bus - USB 3.2 Gen 2 (10 Gbit/s) PS/2 mouse port, green PS/2 keyboard port, purple VGA monitor port, blue DP1 / DP2 DisplayPort DVI-D screen connection HDMI port HDMI Serial port Audio output (Line Out), light green Audio input (Line In), light blue LAN port Fujitsu... -
Page 26: Connecting A Monitor
The PS/2 mouse is only detected by the device if you connect the mouse when the device is switched off and then switch the device on again. ► Connect the PS/2 mouse to the PS/2 mouse port of the device. PS/2mouse, Connecting, PS/2mouse, ► Switch your device on again. Fujitsu... -
Page 27: Connecting The Keyboard
The devices connected to the serial interface require drivers. Your operating system already includes many drivers. If the required drive is missing, install it. The latest drivers are usually available on the Internet or will be supplied on a data carrier. Fujitsu... -
Page 28: Connecting External Devices To The Usb Ports
External USB devices which you connect to one of the USB ports don’t usually need their own drivers because the software required is already included in the operating system. If the device requires separate software, please follow the instructions in the manufacturer’s documentation. Fujitsu... -
Page 29: Installing The Cable Cover (Optional)
► Insert the latch of the cable cover (not shown here) on the back of the assy slightly obliquely into the eyelet, to secure the cable cover (1). ► Run the lines out through the opening (2) in the cable cover (3). ► Slide the cable cover completely onto the assy. Fujitsu... - Page 30 Installing the cable cover (optional) ► Secure the cable cover with screws (4). ► If necessary, attach a Kensington MicroSaver to the Security Lock (5) on the cable cover. Fujitsu...
-
Page 31: Switching On For The First Time: Installing The Software
Switch on the monitor and the machine ► Switch on the monitor (see operating instructions for the monitor). ► Press the ON/OFF switch (1) on the front of the device. The operational display will light up and the machine will start. Fujitsu... -
Page 32: Installing The Software
You will find more information on the system, as well as drivers, utilities and updates on the optional "Drivers & Utilities" DVD and on the Internet at "http://www.fujitsu.com/fts/support". You can find information and help on the Windows operating system functions on the Internet at "http://windows.microsoft.com". -
Page 33: Operation
Setup, In the BIOS Setup, you can set system functions and the hardware configuration of the device. At delivery, the default entries are effective (see BIOS manual or mainboard manual). You can customize these settings in the BIOS Setup. Fujitsu... -
Page 34: Property And Data Protection
MicroSaver each. Please consult the manual for your Security Lock. Lead-sealing To prevent unauthorised persons from opening the casing, the casing can be lead-sealed. To do this, feed the sealing chains through the eye (2) and seal the chains with a lead seal. Fujitsu... -
Page 35: Locking The Assy Mechanically (Fujitsu Desktop Esprimo D7010 / D9010 Only)
Operation Locking the assy mechanically (FUJITSU Desktop ESPRIMO D7010 / D9010 only) Casing mechanicallock Casing Lock Casing lock With the casing lock (1) you can mechanically lock the casing to prevent unauthorised persons from opening it. On delivery, you will find the keys on the rear panel of your device. -
Page 36: Access Authorisation Via Smartcard
EraseDisk DeleteSATAharddisk Erase Disk is a solution integrated in the firmware of FUJITSU desktops (UEFI: Unified Extensible Firmware Interface) to delete all data from a hard disk or Solid State Disc drives (SSDs). With this function, all data from internal disks or SSDs can be irretrievably deleted before the hard disks or the whole system are disposed of. -
Page 37: Software Installation And Restore
Download current drivers/software ► Switch the device on. ► In the browser, select the address "http://www.fujitsu.com/fts/support". ► Select the desired product group, e.g. Client Computing Devices. ► In the Downloads area, select the entry More Details. -
Page 38: Problem Solutions And Tips
► Contact the Service Desk responsible for your country for clarification of the problem: "http://support.ts.fujitsu.com/contact/servicedesk". When you do this, please have ready the ID number and serial number of your system. -
Page 39: The Device Cannot Be Switched Off With The On/Off Switch
► Restart the system. Incorrect setting for the monitor ► Press while the system is booting. ► Start the system in Safe Mode. ► Set up the monitor as described in the documentation for your operating system and monitor. Fujitsu... -
Page 40: No Mouse Pointer Displayed On The Screen
► Check whether you have inserted your SmartCard into the SmartCard reader the right way with the chip facing upwards. ► Check whether the SmartCard you are using is supported. Your SmartCard must comply with the ISO standard 7816-1, -2, -3 and -4. Fujitsu... -
Page 41: Smartcard Pin Forgotten
Supervisor PIN. Error messages on the screen Error messages and their explanations are provided: • in the technical manual for the mainboard • in the documentation for the programs used Fujitsu... -
Page 42: Clean/Replace Dust Filter
Clean/replace dust filter Dustfilter Your system can be protected from dust particles by an optional dust filter. Information on cleaning and dust filter replacement can be found on the Internet in the "System Expansions and Repairs" manual at "http://www.fujitsu.com/fts/support". Fujitsu... -
Page 43: System Expansions And Repairs
Servicing Information on system expansions and repairs can be found on the Internet in the "System Expansions and Repairs" manual at "http://www.fujitsu.com/fts/support". Operations that are distinguished in the manual as Only For Service, such as repairs to the device, may only however be performed by authorised service technicians. -
Page 44: Technical Specification
Clearance required to ensure adequate ventilation: Without air vents min. 10 mm / 0.39 inch With air vents min. 200 mm / 7.87" The data sheet for this device provides further technical data. The data sheet can be found on our website "http://fujitsu.com/fts/". Fujitsu... -
Page 45: Index
Delete SATA hard disk 32 Device Lead-sealing 30 Connections 21 Line In 21 indicators 11 Line Out 21 switching off 29 Lock 31 Switching on 29 Device drivers, serial interface 23 Mains adapter Device, connecting 19 Anti-theft protection 30 Lead-sealing 30 Fujitsu... - Page 46 USB port 22–23 port 22 USB port, connecting devices 24 connecting keyboard 23 Recycling 7 connecting the mouse 22 Retransportation 7 User Documentation DVD 7 Safety information 7 Vertical operating position 15 Security functions Video workstation 14 BIOS Setup 31 Fujitsu...