Important Safety Information; Important Charging Information - Projecta IS910E Manual

IMPORTANT SAFETY INFORMATION

Please read this manual thoroughly before use and store in a safe place for future
reference.
WARNINGS
• Risk of explosive gas. Working in the vicinity of a lead-acid battery can be dangerous.
Batteries release explosive gases during normal operation, charging and while
jumpstarting a battery. Before using this Jumpstarter, read and follow the instructions
carefully. Follow all manufacturer's instructions and warnings on the vehicle's battery and
other equipment being used.
• Jumpstart 12V lead-acid batteries only. Do not use to jumpstart dry-cell batteries
commonly found in household appliances. These batteries may burst and cause injury
and/or property damage.
• Do not smoke, use matches, use a cigarette lighter, or allow a spark or flame near the
battery.
• Do not allow metal to come in contact with the battery posts. It may spark or short circuit
the battery and cause an explosion/fire.
• Always wear eye protection when operating the Jumpstarter.
• Remove rings, bracelets, necklaces and watches when working with a lead-acid battery.
• Contains a Lithium Cobalt battery and must be disposed of properly.
• Ensure correct polarity when connecting to vehicle.
• Although the Jumpstarter is rain proof it is not designed to be left outside for extended
periods or submerge in water.
• Although the Jumpstarter has been designed to protect the battery it is best to not drop
the Jumpstarter or try and pierce the Jumpstarter in anyway, as this can result in a fire.
If the Jumpstarter is physically damaged in any way do not use.
• Do not store the Jumpstarter in temperatures above 40
this can affect the health of the battery and if the temperature is above 120
battery may catch fire.
• Not intended for people (including children) with reduced physical or mental capability.
• Once the vehicle is started disconnect the Jumpstarter immediately after starting.
• Do not try and charge via the USB output as this will damage the Jumpstarter and the
USB output.

IMPORTANT CHARGING INFORMATION

• Charge Jumpstarter prior to first use, this may take up to 4 to 8 hours depending on
the model.
• Fully recharge the Jumpstarter after every use to ensure your Jumpstarter is ready in
emergencies.
• To extend the life of your battery do not let the battery charge level fall below 20%.
• To extend the life of the Jumpstarter battery, do not charge above 45
2
o
Celsius or below -10
o
o
C or below 0
o
Celsius, as
Celsius the
o
C.