Table of Contents
Advertisement
Quick Links
INTELLI-START
12/24V LITHIUM JUMP STARTER
and Portable Power Bank
Pour le manuel en français, visitez
PROJECTA.US ou appelez le 1-888-489-9820.
Para obtener el manual en español, visite
PROJECTA.US o llame al 1-888-489-9820.
WARNING: Cancer and Reproductive Harm.
ADVERTISSEMENT: Cancer et problèmes e reproduction.
ADVERTENCIA: Cáncer y daño reproductivo.
www.P65Warnings.ca.gov
P/No. PJ-IS2000-2
OWNERS MANUAL
PROJECTA.US
Advertisement
Table of Contents
Related Manuals for Projecta INTELLI-START PJ-IS2000-2
Summary of Contents for Projecta INTELLI-START PJ-IS2000-2
- Page 1 INTELLI-START 12/24V LITHIUM JUMP STARTER and Portable Power Bank Pour le manuel en français, visitez PROJECTA.US ou appelez le 1-888-489-9820. Para obtener el manual en español, visite PROJECTA.US o llame al 1-888-489-9820. WARNING: Cancer and Reproductive Harm. ADVERTISSEMENT: Cancer et problèmes e reproduction.
-
Page 2: Important Safety Information
IMPORTANT SAFETY INFORMATION Please read this manual thoroughly before use and store in a safe place for future reference. WARNINGS • This unit has been designed for vehicles with 12V DC and 24V DC electrical systems only. • Risk of explosive gas. Working in the vicinity of car batteries can be dangerous. Batteries release explosive gases during normal operation, charging and jump starting. -
Page 3: Important Charging Information
IMPORTANT CHARGING INFORMATION • Charge the jump starter prior to use, using the supplied USB charger or dock. This may take up to 8 hours. • Fully recharge the jump starter after every use to ensure your jump starter is ready for use in case of an emergency. - Page 4 POWER BANK WITH 2 USB OUTPUTS (2.1A, 3A) • The PJ-IS2000-2 allows charging of phones, tablets, and other small portable devices. 5V DC USB CHARGING • The PJ-IS2000-2 can be charged via a vehicle’s USB output or supplied 12/24V DC socket. PREMIUM SPARK FREE CLAMPS •...
-
Page 5: Specifications
OVER-TEMPERATURE PROTECTION • The PJ-IS2000-2 jump starter has different layers of temperature protection. Should the unit overheat by continuous or numerous jump starts, the unit will shut off automatically and restart once the over-temperature condition subsides. UNDER AND OVER-VOLTAGE PROTECTION •... -
Page 6: Product Overview
PRODUCT OVERVIEW Powerbank USB & jump starter LED work Premium spark 12V DC jump charging port light on/o free clamps start selector Premium EVA case Jump start Full colour 24V DC jump On/o Durable carry work light LCD screen start selector handle LCD DISPLAY SCREEN LAYOUT PJ-IS2000-2 jump starter battery status. -
Page 7: Jump Starting
JUMPSTARTER INSTRUCTIONS Notes: • Instructions for negative grounded vehicles only (most vehicles after 1970 are negative grounded). • Before jump starting a vehicle, it is recommended to ensure the jump starter is fully charged. JUMP STARTING Step Instruction Display The PJ-IS2000-2 jump starter should be charged for around 8 hours prior to first use and as soon as possible after each use. -
Page 8: Override Mode
OVERRIDE MODE Under normal conditions, the PJ-IS2000-2 automatically selects the jump start voltage. However, the user is required to manually select output voltage if the vehicle battery voltage is between 0 to 1V DC. Vehicle Battery Voltage between 0 to 1V DC Step Detail Display... -
Page 9: Usb Output
USB OUTPUT The USB output allows the user to charge external compatible devices. Step Detail Display If the PJ-IS2000-2 is not in jump starting operation, and the user connects an external device to charge the following screen will be displayed. Note: The USB output will be automatically disabled in the following conditions: •... -
Page 10: Error And Alarm Messages
UNDERSTANDING YOUR JUMP STARTER ERROR AND ALARM MESSAGES Error type Error detail Error display Low battery The internal battery voltage of the PJ-IS2000-2 is too low for a jump start. Please charge the PJ-IS2000-2 immediately. LOW BATTERY Charge jump starter Reverse The clamps are reverse connected to the polarity... -
Page 11: Frequently Asked Questions
FREQUENTLY ASKED QUESTIONS Why does my PJ-IS2000-2 take so long to charge on the dock? Lower charging rate extends the battery life. The built-in charging circuit provides gentle 2-stage charge with cell-balancing for the internal Lithium Iron Phosphate (LiFeP04) battery. Can the PJ-IS2000-2 jump start vehicles at temperature lower than 32°F (0°C)? If the PJ-IS2000-2 operates at temperatures below 32°F (0°C), its jump start rated performance will be reduced but it will start vehicles with lower clamp... -
Page 12: Warranty Statement
RMA number supplied by BWI USA or shipment will be returned. Replacement or repaired products will be shipped out prepaid by BWI USA. Brown & Watson International 1601 Boundary Blvd. Auburn, WA 98001 PROJECTA.US ©2023 Brown & Watson International_8/2023...
Need help?
Do you have a question about the INTELLI-START PJ-IS2000-2 and is the answer not in the manual?
Questions and answers