Battery Status Indicator; Charging The Jumpstarter - Projecta IS910E Manual

BATTERY STATUS INDICATOR

When Jumpstarter is turned on battery gauge LED's are displayed.
State of Charge
<20%
20–25%
25–50%
50–75%
75–100%
The Jumpstarter will beep if less than 10.0V until charged or turned off.

CHARGING THE JUMPSTARTER

The Jumpstarter can be charged with the provided 12V DC to USB charge adaptor or a via
3rd party 10 Watt USB 240VAC charger (tablet charger).
1. Plug the 12V to 2.1A USB charge adaptor into a 12V socket.
2. Use the provided USB to micro USB cable:
a. Connect the USB end into the 12V to USB socket.
b. Connect the micro USB end to the Jumpstarter.
The Jumpstarter will now turn on and start charging. The BATTERY STATUS INDICATOR
will now start to scroll in the following ways depending on its state of charge.
State of Charge
<20%
20–50%
50–75%
75–99%
100%
3. When your Jumpstarts is fully changed after 4 hours for IS910E or 8 hours for
IS1210E, simply disconnect the leads and put the Jumpstarter away.
Battery Gauge LED Display
– Red Flashing
– Red
– Yellow
– Green
– Green
Battery Gauge LED Display
– All Flashing
– Red with Yellow & Green Flashing
– Yellow with Green Flashing
– Green with Green Flashing
– All Solid Green
7